This type of concrete curb doesn’t require concrete curbing machine to construct, this type of concrete curb might need to be constructed by hand. Several concrete curb workers might need to be hired and concrete mixer need to be used too. The materials that will be used to construct the curb and gutter forms are concrete, expansion joint filler, curing compound and steel reinforcement bar. The concrete curb and gutter forms will be measured in meter according to Standard of Method of Measurement.

Components of Curb Gutter Forms

The components that used to construct the curb and gutter forms system are slightly different between both types of curb and gutter forms system. The components that will be used for Straight Curb and Gutter setup are front form, nail stake, curb face form, division plate, back form and top spreader. While the components that will be used for Radius Curb and Gutter setup are radius back form, curbface form, full division plate, radius front form, skeleton division plates and form pins.

Types of Curbs for Straight Curb and Gutter Forms

There are 5 basic types of curbs that are used to construct straight curb and gutter forms, types of concrete curb to be used is depending on the situation and location of the curbs to be built.

1) Vertical face – A setup with the front and the back must be in 90 degree angle.

2) Battered face – A curbface with the front and the back must be in somewhere around 90 degree angle.

3) Bottom radius – A battered curbface with a single radius formed into the bottom of the curb.

4) Top and bottom radius – A battered curbface with a radius formed into the top and bottom of the curb.

5) Drive over – A curbface with a slow, gradual batter allowing traffic to pass over.

Source : DeeConcrete

Bookmark

Hide Sites

How To Build Concrete Landscape Edging By Using Miller MC250 & MC350

1) Mixing concrete by using concrete mixer or concrete batch. If by hand, wheelbarrow need to be used. Materials for concrete mixing such as cement, sand and water.

2) Once the concrete been mixed properly, put it in wheelbarrow. Move it to the place that the landscape curbing need to be done.

3) Start the concrete curbing machine (Miller MC250 & MC350).

4) Put in the ready mixed concrete into the concrete curbing machine.

5) A worker is pulling the concrete curbing machine, and the concrete landscape edging is built in shape. Another worker keep filling concrete into the concrete curbing machine.

6) Once the concrete landscape edging is done in shape, pull out the concrete curbing machine from the edging.

7) After that, a worker is smoothing the concrete landscape edging with a tool. Finishing the surface of concrete landscape edging and make it stable. Repeat this step for the whole concrete landscape edging.

8 ) Done!

Building concrete landscape edging by using concrete curbing machine is actually easy, it has lot of advantage such as time saving because these can be done in short period, minimum workers needed, low cost because of less time and worker, works done in clean and tidy condition, and etc. Most of the contractor like to use this method to build concrete landscape edging because it’s simple and low cost.

Bookmark

Hide Sites

Contractor uses concrete agitator to mix the concrete which require larger mixture or large quantity of concrete, so contractor might need to mix the concrete by using agitator. Usually worker just has to throw all the concrete mixture material such as sand, water and cement into concrete agitator and the roll will be starting to swing and mix the concrete until it’s properly mixed.

How To Lay Concrete Curb With Concrete Agitator

1) Throw all the concrete mixture material such as cement, water and sand into concrete agitator, swing the roll until the concrete is properly mixed.

2) Concrete curbing machine has to be used, set the concrete curbing machine at the place where the contractor want to build the concrete curb.

3) Make sure the opening of concrete agitator is aiming to the concrete curbing machine so that the concrete can be dropped into the concrete curbing machine.

4) Everything set on place, concrete agitator opens its’ opening and the concrete is flow out into the concrete curbing machine, a worker is controlling the concrete curbing machine, another worker is pulling out the concrete from the opening of concrete agitator to make it flowing out faster into the concrete curbing machine.

5) The worker who controls the concrete curbing machine is pulling the concrete machine so that the concrete curb can be lay on shape. After that, the concrete curb is done in shape in short time.

The advantage of using concrete agitator to build concrete curb is the minimum usage of labour which can be saving the labour cost. Besides this, this method is easy and fast, it can saves up a lot of time and cut off the expenses. From the video clip, it only requires 3 workers to lay the concrete curb. Due to current economic downturn, contractor must plan and decides the cheapest and most economic way or method to construct their structures.

Bookmark

Hide Sites

Concrete curbing machine has many features, you have to find out what is their standard specifications and functions when you decide to buy a curbing machine. I’ve gone through to make another short list of concrete curbing machine, I hope it helps you.

List Of Concrete Curbing Machine

1) Curb Machine Kit With Forms

Features :
i) It’s used to construct concrete curb for landscaping, sidewalks, driveways and etc.

ii) The curbing machine come with three molds, which is flat mower style, curb style, and slant style.

iii) Able to run on 115V/60HZ.

2) MC 250 Landscape Curb Machine

Features :
i) Can be used in variety of location like golf courses, parking lots, recreation areas, water retention areas, garden borders and also miniature putting greens.

ii) Very fast in productivity, it can produces 12 feet of concrete curb in a minute.

iii) There is a large hopper with anti-bridging design improves the machine productivity.

iv) Easy to carry. The size for this curbing machine is small, the lifting bail makes it easy to lift the curbing machine too.

3) MC 350 Landscape Curb Machine

Features :
i) It’s similar with MC 250, but it’s designed to be used for decorative landscape curbing and smaller commercial curbing.

4) MC 550 Tack Down Curb Machine

Features :
i) It provides economical method of placing free standing, high-density extruded curb from either concrete or asphalt.

ii) The auger is changeable to provides largest range of curb sizes.

iii) This curbing machine is only for heavy duty. It can produces very smooth and stable concrete curb.

5) MC 1050 Slipform Curb & Gutter Machine

Features :
i) It can produces the concrete curb in fast speed which is 12feet per minute.

ii) It’s suitable to be used for commercial and residential curbing works which has limited duration to complete the curbing works.

iii) It’s easier to move and carry with tandem axle trailer.

6) Acu Edge

Features :
i) It’s a very high production curbing machine with its’ speed.

ii) It’s very stable and produces smooth and neat concrete curb.

More Concrete Curbing Machine : List Of Concrete Curbing Machine

* Thanks to all suppliers for providing the useful information to www.Concrete-Curb.com.
Curb Appeal USA | Miller Spreader | Harbor Freight

Bookmark

Hide Sites

By choosing a suitable concrete curb machine, you have to check their features, purposes and know how they work. I’ve a list of few concrete curbing machine, I hope it helps.

List Of Concrete Curbing Machine

1) PRSting

Features :
i) The curb machine can do compaction nicely with its double drive compactor.

ii) The mold for concrete curb is changeable.

2) RE500

Features :
i) It comes with a single drive compactor that it allows you to do a compaction on the concrete curb and make it look nice and strong.

ii) The mold for concrete curb is changeable.

3) Twin Auger Curb Machine

Features :
i) It consists of self-feeding hopper and twin auger as well. It moves very fast and able to lay up to 12 feet per minute.

ii) It’s very smooth when the machine lays the concrete curb.

iii) The machine moves steadily and it helps to lay the concrete curb straight.

iv) It’s a very small and simple concrete curb machine, it don’t require a lot of labours, it saves your cost.

4) Orbital Ram curb Machine

Features :
i) It comes with self-feeding hopper, it allows you feed the curb machine with large amount of materials, it saves your times and more productivity.

ii) It produces very smooth and self compacted concrete curb, concrete curb will be stronger and can be stay for very long without cracks.

iii) The machines can either use gas or electric power, you can choose either one that you feel comfortable.

5) Creative Curb Machine

Features :
i) It’s very light and easy to carry to everywhere.

ii) The machines can either use gas or electric power.

iii) The machines has a orbital pattern and able to cut down concrete waste at the side of the concrete curb, it saves times and works.

6) Light Pro Curb Machine

Features :
i) The machine can cuts a line on the side or front of the concrete curb, it allows you to install a lighting robe insides it.

ii) It can cuts in faster speed, say 10 feet or faster per minute.

iii) The machines cuts the line steadily because it’s locked at the concrete curb in safe way.

7) Commercial Curb Machines

i) The curb machine has normal speed to lay 8-15 feet of concrete curb per minute.

8 ) EP Curb Machine With Two Molds (LB100)

Features :
i) The concrete curb machine has a consistent flow of concrete and lay the concrete curb in good quality and smooth.

9) TT Curb Machine With Two Molds (LB300)

Features :
i) It’s one type of landscape curb machine.

ii) It’s very economic that many contractors are able to buy it.

iii) This curb machine is not suitable to be used on 24″ garden walks due to lacks of power.

10) Auger Curb Machine with Two Molds (LB400)

Features :
i) The curb machines is suitable to be used on asphalt or concrete surfaces.

ii) It comes with auger that able to produces very smooth concrete curb.

iii) It’s same to TT Curb Machines With Two Molds (LB300) that is not suitable to be used on 24″ garden walks.

11) EPC Curb Machine With One Custom Mold (LB200)

Features :
i) The curb machine can lay in very fast speed, it’s suitable for those contractor who want to complete the job in short period to save cost.

ii) It’s used to construct concrete curb for parking lot.

12) Curbmaster 3000

Features :
i) The machine in a small and unique size, it’s designed to make smooth turning. Normally it’s used in carparks, highways, expressway, and etc.

ii) It can lay about 300 metres in a day.

13) Curbmaster 4000

Features :
i) It’s same with Curbmaster 3000, it’s designed to make smooth turning as well.

ii) Other than this, it has higher power than Curbmaster 3000 and can produce more quantities of concrete curb. It can lay about 400 metres in a day.

14) Curbmaster 6000

Features :
i) The curb machine has larger sizes than Curbmaster 3000 and Curbmaster 4000, while it has larger power than them. It can lay about 500 metres in a day.

15) 175 CG

Features :
i) It’s a smaller curb machine.

ii) It can produces concrete curb in few locations like parking lots, mower edge, garden curbs and etc.

16) BC-400 Biz Curb

Features :
i) It’s purposely used for landscape curbing.

ii) The curb machine has a low power while it can only lay about 200 metres in a day.

17) Miller MC-550 Industrial Curbing Machine

Features :
i) The machine comes with interchangeable auger. It saves times and work.

18) Curb-Tec CT-900 Industrial Curbing Machine

Feature :
i) This curb machine able to lay rebard reinforced or trench curbs.

ii) It can produce concrete or asphalt curbs.

19) Curb Appeal CLS-650 Landscape Curbing Machine

Features :
i) It’s an advanced concrete curb machine.

ii) It provides a very consistent flow of concrete and produce a very smooth and quality curb.

iii) Normally it’s used for landscape curbs and commercial curbs.

20) Miller MC 250 Landscape Curbing Machine

Features :
i) This curb machine is purposely created for decorative landscape curbing.

ii) It can be used in a lot of location like golf courses, parks and recreation areas, water retention areas, garden borders, and miniature putting greens.

21) Mud Buddy Curb Weasel Landscape Curbing Machine

Features :
i) This curb machine has a easy operation because of the usage of gas power.

22) Tygar MFG TG1000PE Electric Landscape Curbing Machine

Features :
i) This curb machine is for landscape curbing purpose as well.

* Big thanks to all the suppliers for providing great information!
Borderlinestamp | Curb King | Curb Machine | Curb Tech Design | Construction Complete

Bookmark

Hide Sites