Concrete curb can be done in several ways, some contractors build it by hand, while some contractors build it by using concrete curbing machine, it’s depending on the situation and requirement by client. It goes same to building concrete landscape edging, it can be done in several methods. Basically the procedure and method are almost the same with building concrete landscape curbing. In this tutorial will show you how to building concrete landscape edging by using concrete curbing machine which is Miller MC250 & MC350.

How To Build Concrete Landscape Edging By Using Miller MC250 & MC350

1) Mixing concrete by using concrete mixer or concrete batch. If by hand, wheelbarrow need to be used. Materials for concrete mixing such as cement, sand and water.

2) Once the concrete been mixed properly, put it in wheelbarrow. Move it to the place that the landscape curbing need to be done.

3) Start the concrete curbing machine (Miller MC250 & MC350).

4) Put in the ready mixed concrete into the concrete curbing machine.

5) A worker is pulling the concrete curbing machine, and the concrete landscape edging is built in shape. Another worker keep filling concrete into the concrete curbing machine.

6) Once the concrete landscape edging is done in shape, pull out the concrete curbing machine from the edging.

7) After that, a worker is smoothing the concrete landscape edging with a tool. Finishing the surface of concrete landscape edging and make it stable. Repeat this step for the whole concrete landscape edging.

8 ) Done!

Building concrete landscape edging by using concrete curbing machine is actually easy, it has lot of advantage such as time saving because these can be done in short period, minimum workers needed, low cost because of less time and worker, works done in clean and tidy condition, and etc. Most of the contractor like to use this method to build concrete landscape edging because it’s simple and low cost.

Bookmark

Hide Sites

There is many different types of concrete curbing machine in construction area. They have specific curbing machine for specific usage, normally it’s used for such as for garden, yard, roadside, side of bridge and etc. The function for the road curb and landscape curb will be slightly different, but the concrete curbing machine to be used might be almost similar.

Concrete curbing machine has many features, you have to find out what is their standard specifications and functions when you decide to buy a curbing machine. I’ve gone through to make another short list of concrete curbing machine, I hope it helps you.

List Of Concrete Curbing Machine

1) Curb Machine Kit With Forms

Features :
i) It’s used to construct concrete curb for landscaping, sidewalks, driveways and etc.

ii) The curbing machine come with three molds, which is flat mower style, curb style, and slant style.

iii) Able to run on 115V/60HZ.

2) MC 250 Landscape Curb Machine

Features :
i) Can be used in variety of location like golf courses, parking lots, recreation areas, water retention areas, garden borders and also miniature putting greens.

ii) Very fast in productivity, it can produces 12 feet of concrete curb in a minute.

iii) There is a large hopper with anti-bridging design improves the machine productivity.

iv) Easy to carry. The size for this curbing machine is small, the lifting bail makes it easy to lift the curbing machine too.

3) MC 350 Landscape Curb Machine

Features :
i) It’s similar with MC 250, but it’s designed to be used for decorative landscape curbing and smaller commercial curbing.

4) MC 550 Tack Down Curb Machine

Features :
i) It provides economical method of placing free standing, high-density extruded curb from either concrete or asphalt.

ii) The auger is changeable to provides largest range of curb sizes.

iii) This curbing machine is only for heavy duty. It can produces very smooth and stable concrete curb.

5) MC 1050 Slipform Curb & Gutter Machine

Features :
i) It can produces the concrete curb in fast speed which is 12feet per minute.

ii) It’s suitable to be used for commercial and residential curbing works which has limited duration to complete the curbing works.

iii) It’s easier to move and carry with tandem axle trailer.

6) Acu Edge

Features :
i) It’s a very high production curbing machine with its’ speed.

ii) It’s very stable and produces smooth and neat concrete curb.

More Concrete Curbing Machine : List Of Concrete Curbing Machine

* Thanks to all suppliers for providing the useful information to www.Concrete-Curb.com.
Curb Appeal USA | Miller Spreader | Harbor Freight

Bookmark

Hide Sites