Concrete edging machine is used to build the concrete edging or concrete landscape edging. Concrete edging machine is widely used by concrete contractor to build the concrete edging. There are variety types of concrete edging machine in the market, all of them have various usage and price as well. Some of the concrete edging machine has multi-purpose, it could be used for building concrete edging or landscaping edging.

List Of Concrete Edging Machine

1) PRSting

Features :
i) The curb machine can do compaction nicely with its double drive compactor.

ii) The mold for concrete curb is changeable.

2) RE500

Features :
i) It comes with a single drive compactor that it allows you to do a compaction on the concrete curb and make it look nice and strong.

ii) The mold for concrete curb is changeable.

3) Creative Curb Machine

Features :
i) It’s very light and easy to carry to everywhere.

ii) The machines can either use gas or electric power.

iii) The machines has a orbital pattern and able to cut down concrete waste at the side of the concrete curb, it saves times and works.

4) Edgemaster Series 800 Concrete Curbing Machine

Features :
i) This concrete edging machine able to build up to 300ft concrete edging in a hour.

ii) It’s light and can be operated by one person.

iii) It has gas-powered or electric models.

5) Lil Bubba EP Curbing Machine

Features :
i) This concrete edging machine can be building up to 4.8 metres concrete edging per minute.

ii) It has a 3.8 liters fuel tank, so it can building concrete edging for longer period without filling fuel too frequent.

6) TYGAR ’s Bengal TG1000 Curb Machine

Features :
i) This concrete edging machine able to produce up to 16ft of concrete edging per minute.

ii) It has over 30 different stamp patterns to match brick, slate, stone, and other designs.

7) Borderline Edging Machine

Features :
i) Mould is changeable where you can change to 3 designs of concrete edging.

ii) Easy to operation and environmental friendly.

Sources : Edgemaster | Taylormadeedging | Tygarmfg | Borderline

Bookmark

Hide Sites

Concrete landscape curb can be either precast or cast-in-situ. As what I mentioned in my previous article, cast-in-situ is those concrete that constructed on the spot on the site by labour. Probably concrete landscape curb is used to decorate our yard and make our yard to be different with your neighbours. Other than this, we call it as landscape edging as well. By using landscape edging for your yard, it makes your garden looks neat and clean as well.

Concrete landscape curb can be done by simple landscape curbing machine as what I show in “Concrete Curbing Machine List“. It don’t cost you a lot and it simple and fast to settle the job. It doesn’t like what I wrote for concrete road curb which curved combined concrete road curb and gutter takes you about few days to finish it.

Step By Step : How To Build Concrete Landscape Curb

I found a video from Youtube that we can learn how to build the concrete landscape curb for our yard, it’s a very simple video and it takes your 2 minutes to learn how to construct concrete landscape curb in short time.

1) Ground preparation
Ground preparation is meaning that we have to excavate a shallow with a hoe. After that, we have to make it flat and neat so that the landscape curbing machine can be move smoothly and done in short time.

2) Mixing concrete
After ground preparation, we may have to start mixing the concrete with a concrete mixer and bring it to the construction location.

3) Laying concrete
So we can now start laying concrete on the location that we want to construct landscape curbing. We will fix the landscape concrete curbing machine on the edging 1st, we need 2 persons to work on it if not the progress might be very slow. 1 person control the curbing machine and 1 person put the concrete into the machine. After put the concrete into the machine, another person will be pulling the curbing machine and the curb shape will be follow by the machine as what we saw in the video.

4) Finishing
The concrete edging is not as smooth as what we want, so we have to make it smooth with a tool. After that, we have to cut it into pieces.

5) Exposing Aggregate
In this stage, we have to expose the aggregate on the surface of curbing edging and make it stabilize and stand for longer without cracking.

6) Stamping
After that, we have to do stamping on the surface of the landscape curbing. The landscape curbing is now looks like built with small pieces of brick. The purpose of this is to make it unique and decorative. We have to do it unique because the main purpose of doing landscape curb is to make the place looks unique and decorative.

7) Spraying
Last, spray again with the aggregate and make it stable again. Done!

Conclusion

By building the concrete landscape curb, it only takes you a very short period to complete it. What you get is a very nice and unique garden, it totally looks different with your neighbours. The work is done in few hours time, it doesn’t make your place dirty and messy. It’s the easiest and simplest way to build the concrete landscape curb for your garden and yard.

Bookmark

Hide Sites